Backtrace Under Mac OS X

From Bluefish Wiki
Revision as of 10:45, 27 October 2008 by Christian (talk | contribs)
Jump to navigation Jump to search

=== Compiling the latest snapshots under Mac OS X

====The following steps apply to:

  • MacOS 10.2.8 or 10.3
  • Fink 0.15.0 and higher
  • Fink rsync (recommanded) or Fink cvs
  • either gcc 3.1 or gcc 3.3

====Steps to perform:

  • Note: Those steps are the necessary steps if you have not compiled bluefish in local tree previously.
  • If you have already compiled bluefish in local tree, and provided that the source files you want to backtrace have a #define DEBUG into them, which is not commented out, just perform steps 10-4, 10-5, 12bis, 13 and 14. You can check for the existence of the #define DEBUG lines by untaring the source file located in /sw/src. Copy it to your Desktop and perform step3.
  • If you have already compiled bluefish in local tree, and the #define DEBUG lines do not exist or are commented out, move the source tarball to your desktop and perform steps 3, 4, 5, 6, 9, 10-2, 10-4, 10-5, 12bis, 13 and 14.
  • If you want to return to normal compiling, remove from the info file--with-debugging-output in the ~ConfigParams line or the whole line if it only contains this flag, and -g in the SetCFLAGS line or the whole line if it contains only that flag, delete the folder bluefishxxx in /sw/src and launch fink rebuild bluefish.

1. Download the tarball from [1], section Development Snapshots.

2. Don't let ~StuffItExpander expand it.

3. Untar it:: 

Open the Terminal

Move to the directory where you downloaded the tarball by typing: cd ~nameofthedirectory

Press enter

Assuming the name of the tarball is bluefish-2003-10-16.tar.bz2, type: bzip2 -dc bluefish-2003-10-16.tar.bz2 | tar -xvf -

Press enter

4. Enable debugging:: 

A new folder named bluefish-gtk2 has been created.

Open it by double-clicking it, open the src folder inside it.

Open the desired c file by double-clicking it and change it as follows:

 If you find a line: / #define DEBUG / near the top of the file, just remove the / and / on this line

 If this is not the case, add a new line just after the first */ and type: #define DEBUG

Save the file

5. Tar the folder again:: 

Type in the terminal: tar cf bluefish-2003-10-16.tar bluefish-gtk2

Press enter

Move the tarball you downloaded elsewhere

Type in the terminal: bzip2 bluefish-2003-10-16.tar

Press enter in the terminal.

6. Copy the new tarball to /sw/src:: 

Type in the terminal: sudo cp bluefish-2003-10-16.tar.bz2 /sw/src

Press enter

Enter your password at the prompt

7. Check you gcc version with:: 

gcc --v

8. Copy Fink's bluefish.info and Fink's bluefish.patch files to your local tree (if not already done) with:: 

If you use gcc 3.1:

sudo cp /sw/fink/10.2/unstable/main/finkinfo/editors/bluefish.* /sw/fink/10.2/local/main/finkinfo/

If you use gcc 3.3 (be aware not to split the line):

sudo cp /sw/fink/10.2-gcc3.3/unstable/main/finkinfo/editors/bluefish.* /sw/fink/10.2/local/main/finkinfo/

If you only have a 10.3 tree:

sudo cp /sw/fink/10.3/unstable/main/finkinfo/editors/bluefish.* /sw/fink/10.3/local/main/finkinfo/


9. Compute the MD5 checksum for the snapshot with:: 

md5 /sw/src/nameofthebluefishtarball

10. Edit the info file with:: 

sudo pico /sw/fink/10.2/local/main/finkinfo/bluefish.info

or:

sudo pico /sw/fink/10.3/local/main/finkinfo/bluefish.info

1 - Change the Version: line to match the date in the tarball's name, i.e. if the name of the tarball is bluefish-2003-10-16.tar.bz2, change it to:

Version: 2003-10-16

2 - Change the Source-MD5: line to have the new computed MD5 checksum.

3 - Check if you have a ~SourceDirectory line (if not already done):

If you have one, change it to: ~SourceDirectory: bluefish-gtk2

If you don't have one, add a new line just after the Source-MD5 line, and type: ~SourceDirectory: bluefish-gtk2

4 - Add the g flags to the following line (create it if it does not exist) just under the ~SourceDirectory line:

~SetCFLAGS: -g

5 - Add the appropriate flag to the following line just under the above one:

~ConfigureParams: --with-debugging-output

11. Edit the patch info file with:: 

sudo pico /sw/fink/10.2/local/main/finkinfo/bluefish.patch

or:

sudo pico /sw/fink/10.3/local/main/finkinfo/bluefish.patch

Change the first two lines to have the date of the tarball's name in them, i.e. if the name of the tarball is bluefish-2003-10-16.tar.bz2, change them to:

--- bluefish-2003-10-16/configure

+++ bluefish-2003-10-16-patched/configure

12. Check you Fink configuration with:: 

cat /sw/etc/fink.conf

The Trees: line should match the following:

Trees: local/main unstable/main unstable/crypto stable/main stable/crypto local/bootstrap

If this is not the case, open the file with:

sudo pico /sw/etc/fink.conf

and change the line accordingly.

12bis. (Only for version < 0.12) Remove any gnome-vfs2-ssl librairies as long as their versions are lower than 2.2:: 

Check the version with:

fink list -t -i gnome

Remove the offending librairies (if any) with:

fink remove gnome-vfs2-ssl gnome-vfs2-ssl-dev gnome-vfs2-ssl-shlibs

13. Rebuild the bluefish package:: 

For version < 0.13:
fink -k rebuild bluefish

For version >=0.13:

fink -k rebuild bluefish-gnome2 if have GNOME2 installed

fink -k rebuild bluefish otherwise

14. Start gdb:: 

Launch X11 or XDarwin. Open an xterm.

Move to the directory where the source is located by typing:

cd /sw/src/bluefish-2003-10-16/bluefish-gtk2/

Launch gdb with: gdb src/bluefish

Then see details on DebuggingBluefish from Type r to start
Retrieved from "https://bfwiki.tellefsen.net//index.php?title=Backtrace_Under_Mac_OS_X&oldid=62"